Best Metal Detectors for the Beach Hunting [updated]

3 Best Metal Detectors for the Beach

Are you trying to go steel detecting at the seashore and no longer certain what detector to buy? Accept as true with it or not, simplest sure steel detectors will perform nicely on the seaside – most just can not handle the high mineralization of saltwater. This text will teach you what to look for and assist you pick out the quality seashore detector to your budget.

Opposite to what some human beings may also claim on certain on line steel detecting boards, not all steel detectors can be used at the seashore.

best metal detector for the beach

I can’t tell you how normally i am getting requested the question, what detector have to i purchase that may deal with salt, is water resistant, may be used anywhere, and below $1,000?

It doesn’t exist.

This text will help you to apprehend why that’s the case, and positioned you on the route to choosing the first-rate metallic detector for the seashore.

But first, here is a sneak top at six seaside detectors i rather recommend:

Metal Detector Technology:

So why isn’t there an all-around metallic detector beneath $1,000 that may be used in saltwater?

I realize whilst the common non-detectorist pics someone steel detecting, they see an photo of someone at the seashore.

So how ought to it’s that maximum detectors aren’t highest quality for seashore use?

It comes right down to technology and the layout of the detector. Maximum detectors are built for all-around hunting on land and are ‘single frequency’ machines.

metal detector techonlogy

Metal detecting generation
Unmarried frequency machines can not handle saltwater, length.

Ok technically you can still use them on salt, but you’ll locate that you have to hunt with extraordinarily low sensitivity settings which dramatically limits your intensity competencies.

You’ll additionally locate that the goal identity may be wildly erroneous.

So what’s the factor?

Metallic detecting in and around saltwater calls for completely special era than an all-round land device – either ‘multi-frequency’ or ‘pulse induction.’

Now allow me be clear, this does not observe if you’re just trying to hunt on dry, white sand at the seashore.

If you’re just making plans to detect on dry white sand, then your excellent guess is to examine certainly one of our other guides:

But extreme beach hunters know that when you scan the ‘towel line,’ maximum of the good finds will both be inside the surf or the water itself.

So if you question me, your detector of desire have to be able to cope with all regions of the beach, not just the towel line.

All of the detectors in this text i endorse are either multi-frequency or pulse induction (pi).

Permit’s speak approximately the main differences between those technology, in addition to a number of the alternative things to look for in a seaside detector.


First, multi-frequency machines tend to be more expensive than a single frequency.

It’s a technology used in the better-stop minelab fbs detectors just like the e-trac and ctx 3030 (different manufacturers also use mf generation).

In a nutshell, those detectors transmit a couple of frequencies simultaneously which could penetrate minerals like salt, provide you with higher depth, and extra accurate goal identification.

They look and feel lots like single frequency machines; however, the era is a long way advanced any way you slice it (not only for seashore looking).

Pulse induction (pi)

Pulse induction machines on the other hand look and sense very exceptional than unmarried and multi-frequency detectors.

These are considered specialty machines and utilized by severe seaside hunters and gold prospectors.

While pi detectors can get you higher intensity at the beach, i’d now not endorse one if the beaches you want to seek have quite a few trash (or black, iron-wealthy sand) because it’s an awful lot tougher to discriminate.

Which era is better?

So which this kind of technology is first-class for detecting on the seaside?

Nor is higher, but they’re very distinct.

Here are some motives to choose a multi-frequency versus a pi:

You handiest need to personal one metallic detector and use it for all styles of searching – not simply at the seaside.
You need that allows you to discriminate targets and put off trash signals.
You need to seek on beaches with plenty of black sand (iron). A pi will conflict to discriminate that a lot iron.
Here are some motives to choose a puise induction as opposed to a multi-frequency:

You already very own (or will personal) another steel detector for land.
You handiest want to use it on seashores (or gold nugget prospecting).
You’ll be spending maximum of it slow inside the surf and/or water.
Detectorists who are critical seaside hunters will personal two separate metallic detectors – one for the beach, and one for the whole lot else.

One you pick the era you need to go along with, here are a few other capabilities to look for:

Water-proof, waterproof, submersible?
Good enough, so 99.9% of steel detectors have water-resistant, submersible coils.

But the relaxation of the detector (in particular the manipulate container), isn’t always even water-resistant and can’t be used underwater.

I continually say if you’re going to hunt in any sort of water, get a completely submersible, underwater detector.

Despite the fact that you are confident you may preserve the manage field out of the water, it’s manner too clean to get hit by means of an unexpected wave while digging a goal.

…And then your detector is toast.

But because you’ll be following the sound advice of this newsletter when deciding on your seaside detector, all of the detectors i propose are absolutely submersible.

You’ll observe that i pass over detectors just like the minelab safari, explorer, and e-trac in my tips.

Whilst these will perform very well in saltwater, they are now not water-proof.

So if you want a minelab multi-frequency detector, you’ll have to step up to the ctx 3030 (my private gadget of preference).

One very last notice in this topic is that submersible detectors are constantly rated by means of depth.

For instance, maximum submersion of 10 toes. A few detectors made for diving can pass as much as 200 toes.

So make sure to take that into consideration while selecting your detector.

My detector guidelines

Now that we’ve got many of the fundamentals out of the way allow’s speak approximately the pros and cons of every of my hints.

Tesoro sand shark

If you’re looking for a true salt water seaside system at an low priced rate, the sand shark is for you. It is a pulse induction detector and the most inexpensive strong point seaside gadget in the marketplace.



Most affordable seashore gadget
Lifetime assurance
Advanced battery lifestyles


Can’t change coil or headphones (unless you ship to manufacturing unit)

Garrett ATX:

We’ve lately introduced the garrett atx on the market in our save, so we notion it’d be prudent to offer you with an in depth garrett atx evaluate to go along with it. In the end, it’s far certainly one of garrett’s top rate merchandise, and lot’s of people are beginning to sit up and take note.

For a long term garrett has been trailing it’s principal rival in minelab in terms of a fine pinnacle quit steel detector. Minelab had been offering the gpx 5000 for some time now, even as garrett persevered to provide detectors more centered to the entry stage market.

I trust the human beings at garrett have evolved the atx as the answer to the minelab domination on this area, and to be honest, they have done a quite correct activity. But, even as it is easy to make a right away assessment between the garrett atx and the minelab gpx 5000, it might be incorrect to achieve this. They’re very different machines, that are nonetheless focused at special human beings inside the marketplace place.

True, they’re both quite high priced (despite the fact that the atx is ready half of the fee), the atx is lots less bendy and customizable than the gpx 5000. While that could be a huge poor for pro pros who need to seek for precise goals, it’s a huge bonus to those people who need the capabilities of a pinnacle stop detector, with out the complications involved in expertise the settings and different related complexities associated with the gpx 5000, of which there are numerous.

In phrases of performance, the atx is a beast! It’s nearly the kind of metallic detector that you can take out of the container and simply start using with out a whole lot of notion, despite the fact that like most matters, in case you spend the time mastering the settings and learning how the atx responds to different objectives in one-of-a-kind terrain, you’ll revel in drastically greater success to your hunts, than leaving things set at default.

Minelab Excalibur II:

The sector’s pleasant water detector!

Minelab’s precise vast band spectrum (bbs) era, blended with advanced ground rejecting era, makes the excalibur ii the right underwater gadget. The design of the minelab excalibur ii allows you to use it as correctly in or out of the water – this amphibious device can circulate seamlessly from land, beach and wet sand situations to underwater depths of as much as 200ft (66m)

With superior ground cancelling, false indicators from detecting in salt water are substantially reduced. Revel in the easy but powerful discrimination and be amazed at the sensitivity and depth you discover targets from.

Whether or not you are a long time diver or a casual beachcomber the excalibur ii is unbeatable for working the seaside, wading in the shallows or diving a damage at 2 hundred toes for treasures.


Bbs multiple frequency generation (1.5khz – 25.5khz)
Rcb amplifies weak target indicators within the coil, decreasing noise and boosting faint, deep objects
High visibility fluorescent bodywork and skidplate
Slimline 10″ coil for decreased weight and stepped forward balance.
Nimh rechargeable battery percent for operation as much as 12 hours.
Facet-mount shaft for shallow and surf-wading (to be had as an optionally available accessory).

Here is the More list of best metal detectors for beach